1:32nd scale Bristol F.2b
+3
Xan
JP
Mike
7 participants
Page 3 sur 3
Page 3 sur 3 • 1, 2, 3
Re: 1:32nd scale Bristol F.2b
Hi all,
Upper wing fitted and pre-rigged.
In total there are:
6 cabane strut bracing wires, 2 drag wires, 8 incidence wires, 8 landing wires and 6 flying wires (8 pairs).
Pre-rigged using 0.12 mm diameter mono-filament and 'Gaspatch' 1:48th scale Brutish late turnbuckles (for streamlined wires).
Now it's onto final rigging to the lower wings before adding the aileron control cables,
Mike
Upper wing fitted and pre-rigged.
In total there are:
6 cabane strut bracing wires, 2 drag wires, 8 incidence wires, 8 landing wires and 6 flying wires (8 pairs).
Pre-rigged using 0.12 mm diameter mono-filament and 'Gaspatch' 1:48th scale Brutish late turnbuckles (for streamlined wires).
Now it's onto final rigging to the lower wings before adding the aileron control cables,
Mike
Dernière édition par Mike le Dim 22 Oct - 10:52, édité 1 fois
Squirell50 aime ce message
JP- Messages : 3639
Date d'inscription : 13/05/2018
Age : 62
Localisation : Ambutrix
Re: 1:32nd scale Bristol F.2b
Hi Mike, you think that gaspatch turnbuckles are definitively overscaled ?
Re: 1:32nd scale Bristol F.2b
Hi XanXan a écrit:Hi Mike, you think that gaspatch turnbuckles are definitively overscaled ?
I think most 1:32nd scale turnbuckles are over-scale, especially when you look at those on real aircraft.
I've tried different makes of turnbuckle, but in most cases 1:48th scale are nearer to scale for 1:32nd scale models.
Of course, not all turnbuckles were the same size, so the two scales can be mixed on the same model if necessary.
Mike
Re: 1:32nd scale Bristol F.2b
Hi all,
The wing rigging is complete.
Includes the:
Twin flying wires (8 pairs)
Single landing wires (
Interplane strut incidence wires (
Drag wires (2)
Cabane strut bracing wires (6)
Aileron control cables (2).
Created with 0.08 and 0.12 mm diameter mono-filament, 'Gaspatch' 1:48th scale metal turnbuckles (Type C) and resin streamlined wire end fittings.
Now onto fitting and rigging the ailerons,
Mike
The wing rigging is complete.
Includes the:
Twin flying wires (8 pairs)
Single landing wires (
Interplane strut incidence wires (
Drag wires (2)
Cabane strut bracing wires (6)
Aileron control cables (2).
Created with 0.08 and 0.12 mm diameter mono-filament, 'Gaspatch' 1:48th scale metal turnbuckles (Type C) and resin streamlined wire end fittings.
Now onto fitting and rigging the ailerons,
Mike
CRICKEY aime ce message
Re: 1:32nd scale Bristol F.2b
It's beautiful..
JP- Messages : 3639
Date d'inscription : 13/05/2018
Age : 62
Localisation : Ambutrix
Re: 1:32nd scale Bristol F.2b
Indeed. Quite marvelous!
Jess- Messages : 680
Date d'inscription : 29/03/2023
Age : 53
Localisation : Alsace
Re: 1:32nd scale Bristol F.2b
Hi all,
Aileron control cables added.
Materials used were:
‘Stroft GTM ’ mono-filament of 0.08 mm diameter line.
'Model Factory Hiro’ (MFH) 0.4 mm diameter Clear tube (P-957).
Mike
Aileron control cables added.
Materials used were:
‘Stroft GTM ’ mono-filament of 0.08 mm diameter line.
'Model Factory Hiro’ (MFH) 0.4 mm diameter Clear tube (P-957).
Mike
Squirell50 et CRICKEY aiment ce message
Re: 1:32nd scale Bristol F.2b
Hi all,
The final bits fitted, Engine exhaust pipes, propeller and observers Lewis machine guns.
So the aircraft model is done.
Now it's onto the figures and display base,
Mike
The final bits fitted, Engine exhaust pipes, propeller and observers Lewis machine guns.
So the aircraft model is done.
Now it's onto the figures and display base,
Mike
Squirell50 et CRICKEY aiment ce message
Re: 1:32nd scale Bristol F.2b
Marvellous!!!!
JP- Messages : 3639
Date d'inscription : 13/05/2018
Age : 62
Localisation : Ambutrix
Re: 1:32nd scale Bristol F.2b
tout est très beau.
l'hélice est incroyable ! je suis admiratif et jaloux
l'hélice est incroyable ! je suis admiratif et jaloux
CRICKEY- Messages : 419
Date d'inscription : 02/02/2022
Age : 55
Localisation : Essone
Re: 1:32nd scale Bristol F.2b
Stunning! It's a masterpiece. Bravo.
Jess- Messages : 680
Date d'inscription : 29/03/2023
Age : 53
Localisation : Alsace
Re: 1:32nd scale Bristol F.2b
Hi all,
The figures are now done.
The two mechanic figures were from 'Kellerkind' (54107) and 'Copper State Models' (F32-052).
The Camel and rider were from the 'Master Box' Commonwealth AFV Crew (S3564).
The decorations on the camels saddle cloth were created from the 'Xtradecal' White parallel stripes (XPS2) decal set.
The decorations on the camels breast strap were created from:
'Xtradecal' White parallel stripes (XPS2) decal set
Cut from scrap lozenge decal from a 'Wingnut Wings' Fokker D.VII kit.
The harness rope is copper wire painted with 'Tamiya' Dark Yellow (XF60) then dusted with dark earth pigment,,
Mike
The figures are now done.
The two mechanic figures were from 'Kellerkind' (54107) and 'Copper State Models' (F32-052).
The Camel and rider were from the 'Master Box' Commonwealth AFV Crew (S3564).
The decorations on the camels saddle cloth were created from the 'Xtradecal' White parallel stripes (XPS2) decal set.
The decorations on the camels breast strap were created from:
'Xtradecal' White parallel stripes (XPS2) decal set
Cut from scrap lozenge decal from a 'Wingnut Wings' Fokker D.VII kit.
The harness rope is copper wire painted with 'Tamiya' Dark Yellow (XF60) then dusted with dark earth pigment,,
Mike
Re: 1:32nd scale Bristol F.2b
It's a very beautiful paint. I like the visage..
JP- Messages : 3639
Date d'inscription : 13/05/2018
Age : 62
Localisation : Ambutrix
dakota59- Messages : 1064
Date d'inscription : 20/03/2019
Age : 60
Localisation : 59250 halluin
Re: 1:32nd scale Bristol F.2b
Hi all,
Bristol F.2b, Serial No. A-7194 of No.111 Squadron RFC, Deir-el-Belah, Palestine during 1917.
As usual, a fully detailed build log, which includes all materials, modifications, rigging etc for this build can be downloaded from the 'Logs' page on my site.
https://mikesww1aircraftmodels.com/
Thanks for your comments and support throughout this build,
Mike
Bristol F.2b, Serial No. A-7194 of No.111 Squadron RFC, Deir-el-Belah, Palestine during 1917.
As usual, a fully detailed build log, which includes all materials, modifications, rigging etc for this build can be downloaded from the 'Logs' page on my site.
https://mikesww1aircraftmodels.com/
Thanks for your comments and support throughout this build,
Mike
Squirell50, CRICKEY et Jess aiment ce message
Re: 1:32nd scale Bristol F.2b
Absolutely marvelous!
Thank you for the demonstration.
Thank you for the demonstration.
Jess- Messages : 680
Date d'inscription : 29/03/2023
Age : 53
Localisation : Alsace
Re: 1:32nd scale Bristol F.2b
Marvelous...
It's so marvelous..
It's so marvelous..
JP- Messages : 3639
Date d'inscription : 13/05/2018
Age : 62
Localisation : Ambutrix
Re: 1:32nd scale Bristol F.2b
Gorgeous! Great work, Mike!
The plane and the figures are very well made and painted. A masterpiece.
I love this desert topic.
The plane and the figures are very well made and painted. A masterpiece.
I love this desert topic.
Veneto Vittorio- Messages : 133
Date d'inscription : 27/09/2022
Age : 58
Localisation : Gallia Narbonensis
Re: 1:32nd scale Bristol F.2b
Très beau et merci d'être venu partager ton montage sur ce forum
CRICKEY- Messages : 419
Date d'inscription : 02/02/2022
Age : 55
Localisation : Essone
Page 3 sur 3 • 1, 2, 3
Sujets similaires
» Bristol F.2b
» 1:32nd scale Bristol Scout C 1264
» 1:32nd scale Macchi M.5
» 1:32nd scale Halberstadt D.II
» 1:32nd scale Hanriot HD.1
» 1:32nd scale Bristol Scout C 1264
» 1:32nd scale Macchi M.5
» 1:32nd scale Halberstadt D.II
» 1:32nd scale Hanriot HD.1
Page 3 sur 3
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum
|
|